AIRFLEX SPECTRA-1000 – ANTIBACTERIAL, ANTIFUNGAL, ANTISTATIC VENTILATION DUCTS
Reaction to fire class: D-s2,d2 (PN-EN 13501-1:2019-02)
Compression strength: 500N (PN-EN 61386-24)
Impact resistance: N (PN-EN 61386-24)
Longitudinal stiffness: flexible ducts (3 x DN PN-EN 13180:2004)
Material: modified polyethylene (HDPE-mod.) approved for food contact
External layer:
Properties: high impact strength and mechanical resistance, UV stabilisation – medium
Colour: green
Internal layer:
Properties: antibacterial layer (ISO 22196:2011), antifungal layer (PN-EN ISO 846:2019),
antistatic layer, extremely smooth surface, fluorescent under UV light.
Global migration (average): < 0,5 mg/dm2 (PN-EN 1186-3:2005 and PN-EN 1186-14:2005)
Colour: silver
The Airflex Spectra ventilation ducts are used for air transfer in ventilation and recuperation systems in residential, public and industrial buildings.
The internal wall is entirely made of antibacterial and antifungal material, which protects the ducts from colonisation by undesirable and dangerous for people microorganisms. The material of which the ducts are made was developed by Ingremio and is protected by patents. It was created in cooperation with scientific centres in the course of a research project, during which high effectiveness for different types of bacteria and fungi was confirmed. The material contains silver, copper and other microbiologically active compounds in the polymer matrix so that they do not undergo migration, ionisation and elution. The virtual absence of biologically active compounds migration from the polymer has been confirmed in the laboratory tests that were performed in significantly more aggressive environments compared to these of ventilation systems. The substances used ensure in practice an indefinite bactericidal and fungicidal effect and prevent the formation of defensive mechanisms by bacteria and fungi regardless of air temperature and humidity. The composition of the materials used is entirely safe for people, animals and plants. Moreover, all materials used are approved for food contact.
The ducts are characterised by very high flexibility, so that they can be freely shaped, bent at very small radii (according to the permissible bending radii) and adapt to the installation conditions, without the need for additional fasteners and fittings.
The duct structure ensures mechanical compression strength over 500 N, which allows for their pouring over with structural concrete while performing construction works.
The internal duct wall also has an antistatic effect, which reduces settling and accumulation of dust in the ducts. The smooth internal surface allows for high air flows with low-pressure losses, contributing to the low energy consumption of the entire system. It also makes it easier to clean the ducts if necessary. The double-wall structure of the ventilation ducts with a properly profiled internal wall and closed air voids to a large extent suppresses the entry of noise caused by air flowing inside and thermally insulates.
The Airflex Spectra ventilation ducts are available in a wide range of diameters, which allows for optimal selection to meet the requirements of the ventilation system and construction conditions. The duct ends are secured and sealed during the production process. The entire coil is protected with foil, which prevents possible contamination during transport and storage.
According to the Regulation of the Minister of Infrastructure on technical conditions to be met by buildings and their location, the Airflex Spectra type ventilation ducts should be installed in single-family buildings which are not subject to requirements concerning reaction to fire.
* The original, patented method of determining the dispersion of microbiologically active components in the polymer allows for immediate verification of the presence of active substances, their dispersion and concentration in the plastic. The UV-illuminated Airflex Spectra ventilation duct evenly fluoresces with blue light for immediate microbiological protection analysis.
Available diameters
Nominal diameter
DN (mm)Inside diameter (mm) Outside diameter (mm) Minimum bending radius (m) Length
(m)
50 40 50.5 0.11 50
63 52 63.2 0.15 50
75 61 76.2 0.17 50
90 75 90.6 0.25 50
110 93 110.7 0.33 50
160 136 161 0.4 25
200 176 201.5 0.55 25
* temp. above 10°C
Air flow (m3/h)
Air speed
Diameter DN (mm) 0.5 m/s 1.0 m/s 1.5 m/s 2.0 m/s 3.0 m/s 4.0 m/s 5.0 m/s
50 2.3 4.5 6.8 9 13.6 18.1 22.6
63 3.9 7.8 11.7 15.6 23.4 31.2 39
75 5.3 10.5 15.8 21 31.6 42.1 52.6
90 7.8 15.7 23.5 31.4 47.1 62.8 78.5
110 12.2 24.5 36.7 48.9 73.4 97.8 122.3
160 26.1 52.3 78.4 104.6 156.9 209.2 261.5
200 44 88.1 132.1 176.2 264.2 352.3 440.4
Documents to download:
Hygienic certificate NATIONAL DECLARATION OF PERFORMANCE